SNIJE
● Produkt Parameters
| MODEL | CUT-50AIR | CUT-60AIR | CUT-70AIR | CUT-80D | CUT-80AIR | CUT-100AIR-S | CUT-130AIR | CUT-160AIR | |
| Plasma | Nominearre ynfierspanning (V) | 1P 220V | 1P/2P 220/380V | 3P 380V | |||||
| Rated Input Power (KVA) | 7.9 | 7.8 | 8.8 | 9.8 | 10.8 | 14 | 17.8 | 23.8 | |
| Echte útfierstroom (A) | 40 | 50 | 55 | 60 | 65 | 80 | 105 | 130 | |
| Nominearre útfierspanning (V) | 100 | 100 | 102 | 104 | 106 | 114 | 122 | 132 | |
| Duty Cycle (%) | 40 | 60 | 60 | 60 | 60 | 60 | 60 | 60 | |
| No-load spanning (V) | 380 | 320 | 320 | 290 | 330 | 330 | 340 | 340 | |
| Ferstelbere Strom | 20-50 | 25-60 | 25-70 | 25-80 | 25-80 | 25-100 | 25-130 | 25-160 | |
| GOED | Rated Input Power (KVA) | 6.6 | 6.6 | 7.7 | - | 8.8 | 9.9 | 10.4 | 16.5 |
| Ferstelbere stroomberik (A) | 30-160 | 30-160 | 30-180 | - | 30-200 | 30-220 | 30-250 | 30-350 | |
| No-load spanning (V) | 65 | 66 | 66 | - | 66 | 66 | 66 | 66 | |
| Kwaliteit hânmjittich snijdikte (MM) | 10/koalstof stiel | 12/koalstof stiel | 15/koalstof stiel | 18 | 20/koalstof stiel | 25/koalstof stiel | 30/koalstof stiel | 35/koalstof stiel | |
| Max hânmjittich snijdikte (MM) | 15/koalstof stiel | 15/koalstof stiel | 20/koalstof stiel | 22 | 25/koalstof stiel | 30/koalstof stiel | 35/koalstof stiel | 40/koalstof stiel | |
| Cooling Mode | Loft | ||||||||
| Beskermingsklasse | IP21S | ||||||||
| Isolaasje klasse | F | ||||||||
| Machine Dimension (MM) | 410*230*290 | 430*230*360 | 490*240*420 | 540*320*500 | 600*360*550 | 600*360*550 | 600*360*550 | 640*385*630 | |
| Gewicht (KG) | 13.5 | 21 | 27 | 29 | 35.6 | 36.5 | 39,5 | 54.8 | |
● Foarsoarchsmaatregels foar gebrûk en by it snijen
1. De foardielen fan 'e plasma-snijmasine binne dat de plasma-bôge-enerzjy mear konsintrearre is, de temperatuer is mear lokalisearre, de snijsnelheid is flugger, de ferfoarming is lytser, en it kin roestfrij stiel, aluminium en oare materialen snije. .Plasma cutting masine hat it foardiel fan cutting dikke platen, omdat de cutting snelheid is folle heger as laser en flamme
2. De plasmabôge kin ferskate metalen snije, lykas roestfrij stiel, waarmtebestindich stiel, titanium, molybdenum, wolfraam, getten izer, koper, aluminium en aluminiumlegering. , Cutting RVS. Aluminium dikte oant 200mm of mear.
3. De plasma arc cutting snelheid is flugger, en de produksje is relatyf partiel.
4. By it snijen fan 'e plasmabôge kinne jo in relatyf smelle radian krije, skjin, skjin, gjin kleverige oerbliuwsel, tichtby fertikale ynsidint, lytse ynsidintfoarming en thermyske ynfloed, lytse feroaring yn hurdens, en goede snijkwaliteit.